MikroTik RouterOS 6.40.5 Stable Level 6 Full Cracked

Download:

Pre-Requisites for VMWare:

Tip 1: To use this virtual machine (VM), first unzip the file and then import the OMA Template for the VM into the virtualization software. For VMware Virtual Machine 

Tip 2: In order  to address the MAC Address problem, it is recommended to change the MAC Address by setting the MAC Address to the Generate button .

Tip 3:  If after running the VM, you are asked if you copied or copied the machine, in which case the answer is Copy-Copy.

Introduction to Mikrotik:

MikroTik is a Latvian company that manufactures computer network equipment and wireless communications equipment. The most important product of the company is the microprocessor operating system. The microprocessor is a routing that is made using the Linux kernel. The micro-system operating system, in addition to the ability to install on home computers, is also provided as a hardware-software package. Micro-system operating system was founded in 1995 by two American University Students by writing a Linux operating system. With the formation of 802.11 standards and the development of the hardware, the operating system also added wireless functionality.

This device is one of the strongest routers in the industry and is unique in terms of its unique capabilities.

Microprocessor features include:

Routing

Firewall

Wireless to

Host Host Configuration Protocol (Dhcp server)

Returns the network address and representative host (in nat and proxy server)

Support for IPv6 support (IPv6 support)

User management (user managment)

Load balancing (load balancing)

The circuitry of microprocessor routers is generally divided into routers and wireless routers, but wireless devices also have the ability to roaming, but their main use is in the wireless industry.

RouterOS:

The main product of the micro-based Linux operating system is known as MikroTik RouterOS. By installing on the dedicated hardware of the same company (RouterBOARD) or on the standard x86-based computers, it turns the hardware into a network router and runs many additional features such as the firewall, the service provider, and the network client Virtual private, shaping and promoting the quality of broadband services. It also features access point features and other features in wireless networks. In order to improve the performance level of this operating system, you must obtain the license (license) of each attribute. The company's application for the Microsoft Windows operating system is named Winbox, which provides a graphical user interface to configure the router and monitor its function. At the same time, RouterOS provides access through FTP, Telnet, and SSH.

RouterOS features

RouterOS supports many applications used by Internet Service Providers. For example, OSPF and multi-threaded label switching (VPLS / MPLS). Micro-product support is provided through the community and the wiki. Here are examples of professional and general settings. RouterOS from IPv4 and | Internet Protocol_Security_4 (IPv4) as well as Internet Protocol_Security_6 (from IPv6).

Support for network interfaces in this software almost includes all network interface (NIC) supported by the Linux kernel, except for the wireless interface, with the exception of the Atheros and PRISM interfaces.

Micro-system operating system

The micro-system operating system is actually the same core of microprocessor and similar to the operating system on Cisco routers. Currently, the latest operating system provided by Microcomputer is the same version available on the site, which is the stable and reliable version of the operating system, but its trial version is also available on its site for microsoft.

Use license

Microcycles have used various licenses to reduce costs to reduce costs. What's available today is the Level 3, 4, 5, and 6 licenses. Whenever you buy a microprocessor, you have permission to use one, three, four, five, or six levels on that device. Each license allows you to manage more users on the network. The highest level of license level six will allow you to manage all the features and unlimited users.

What's new in 6.40.5 (2017-Oct-31 13:05):

*) certificate - fixed import of certificates with empty SKID; 

*) crs3xx - fixed 100% CPU usage after interface related changes; 

*) firewall - do not NAT address to 0.0.0.0 after reboot if to-address is used but not specified; 

*) ike1 - fixed crash after downgrade if DH groups 19,20,21 were used for phase1; 

*) ike1 - fixed RSA authentication for Windows clients behind NAT; 

*) ipsec - fixed lost value for remote-certificate parameter after disable / enable; 

*) ipv6 - fixed IPv6 addresses constructed from prefix and static address entry; 

*) log - properly recognize MikroTik specific RADIUS attributes; 

*) lte - do not reset the modem when it is not possible to access SMS storage;

*) lte - fixed modem initialization after reboot; 

*) lte - fixed PIN option after setting up the band; 

*) sms - include time stamps in SMS delivery reports; 

*) sms - properly initialize SMS storage; 

*) snmp - fixed "/ system license" parameters for CHR; 

*) winbox - allow shorten bytes to k, M, G in the hotspot user limits; 

*) wireless - fixed rate selection process when "rate-set = configured" and NV2 protocol is used;

What's new in 6.40.4 (2017-Oct-02 08:38):

*) address - show warning on IPv6 address when acquired from pool has failed; 

*) arp - properly update dynamic ARP entries after interface related changes; 

*) crs1xx / 2xx - fixed 1 Gbps forced mode for several SFP modules; 

*) crs317 - added L2MTU support; 

*) crs3xx - improved packet processing in slowpath; 

*) defconf - fixed RouterOS default configuration (introduced in v6.40.3); 

*) dhcp - fixed downgrade from RouterOS v6.41 or higher; 

*) dhcpv6 client - added IAID check in reply; 

*) dhcpv6-client - fixed IA check is solicit when "rapid-commit" is enabled; 

*) dhcpv6-client - ignore unknown IA; 

*) dhcpv6-client - requires a pool name to be unique;

*) e-mail - auto complete file name is "file" parameter (introduced in v6.40); 

*) export - fixed wireless "ssid" and "supplicant-identity" compact export; 

*) hotspot - fixed missing "/ ip hotspot server profile" if invalid "dns-name" was specified; 

*) hotspot - improved user statistics collection process; 

*) ike1 - remove PH1 and PH2 when "mode-config" exchange file; 

*) ipsec - kill PH1 is "mode-config" address failure; 

*) ipv6 - fixed IPv6 address request from pool; 

*) lte - fixed modem initialization after reboot; 

*) ntp-client - the correct start of the NTP client after the reboot if the manual server IP is not configured; 

*) rb931-2nd - fixed startup problems (requires additional reboot after upgrade);

*) routerboard - fixed "/ system routerboard upgrade" for CRS212-8G-4S; 

*) sfp - fixed OPTON module DDM information readings; 

*) sfp - fixed temperature readings for various SFP modules; 

*) snmp - fixed / caps-man registration-table uptime values; 

*) snmp - fixed "/ system license" parameters for CHR; 

*) tile - improved reliability is MPLS package processing; 

*) userman - fixed unresponsive RADIUS server (introduced in v6.40.3); 

*) vlan - do not allow VLAN MTU to be higher than L2MTU; 

*) webfig - improved reliability of login process; 

*) wireless - added "etsi1" regulatory domain information; 

*) wireless - improved WPA2 key exchange reliability;

*) wireless - updated "norway" regulatory domain information;

What's new in 6.40.3 (2017-Sep-01 07:40):

*) dhcpv6-server - do not release address of static binding from pool after server removal; 

*) export - fixed / / system routerboard export (introduced in 6.40.1); 

*) export - fixed export for PoE-OUT related settings; 

*) ike1 - fixed initiator ID comparison to NAT-OA; 

*) led - fixed "on" and "off" triggers when multiple LEDs are selected; 

*) led - fixed RB711UA ether1 LED (introduced in v6.38rc16); 

*) lte - do not show the USB LTE modem under the "/ port" menu; 

*) lte - fixed ethernet flap when LTE establishes connection; 

*) lte - fixed SXT LTE graphs in QuickSet; 

*) lte - improved reliability of USB LTE modem; 

*) shop-out - fixed router reboot after "store-out-status" changes;

*) rb1100ahx4 - fixed HW acceleration fragment packet decryption when fragment is smaller than 64 bytes; 

*) rb750gr3 - show warning and do not allow the use of "protected-bootloader" feature if "factory-firmware" older than 3.34.4 version; 

*) routerboard - added "mode-button" support for RB750Gr3 (CLI only); 

*) ssh - do not execute command if it starts with "-" symbol; 

*) traffic-flow - fixed reboots when IPv6 address has been set as target address without active IPv6 package; 

*) userman - fixed "limitation" and "profile-limitation" update; 

*) userman - fixed CoA packet processing after changes in "/ tool user-manager router" configuration; 

*) webfig - let's open the table entry even if the table is not sorted by # (introduced in v6.40);

*) webfig - allow you to unset the "rate-limit" for DHCP leases; 

*) winbox - added the opportunity to define "comment" for "/ routing bgp network" entries; 

*) winbox - do not show FAN related information under "/ system health" for devices that does not have it; 

*) winbox - do not show the LCD menu for devices that does not have it; 

*) winbox - fixed ARP table update after entry changes state to incomplete; 

*) wireless - added "russia3" country settings; 

*) wireless - added New Zealand regulatory information for P2P links; 

*) wireless - updated China and New Zealand regulatory domain information; 

*) www - fixed unresponsive Web services (introduced in v6.40);

What's new in 6.40.2 (2017-Aug-08 13:13):

*) dhcpv6-client - fixed IA evaluation order; 

*) led - fixed modem-signal LEDs (introduced in 6.40); 

*) pppoe-client - fixed MRU detection over VLAN interfaces; 

*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40); 

*) sfp - fixed invalid readings when ambient temperature is below 0 ° C; 

*) winbox - added certificate settings; 

*) winbox - added support for the certificate CRL list; 

*) winbox - do not show the LCD menu for devices that does not have it; 

*) winbox - hide "level" and "tunnel" parameters for IPSec policy templates; 

*) winbox - hide the FAN speed if it is 0RPM;

What's new in 6.40.1 (2017-Aug-03 12:37):

*) bonding – improved reliability on bonding interface removal;

*) chr – fixed false warnings on upgrade reboots;

*) dhcpv6-client – do not run DHCPv6 client when IPv6 package is disabled;

*) export – fixed export for different parameters where numerical range or constant string is expected;

*) firewall – properly remove “address-list” entry after timeout ends;

*) interface – improved interface state change handling when multiple interfaces are affected at the same time;

*) lte – fixed LTE not passing any traffic while in running state;

*) ovpn-client – fixed incorrect netmask usage for pushed routes (introduced in 6.40);

*) pppoe-client – fixed incorrectly formed PADT packet;

*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40); 

*) rb922 - restored missing wireless interface on some boards; 

*) torch - fixed Torch in PPP tunnels (introduced in 6.40); 

*) trafficgen - fixed "lost-ratio" showing incorrect statistics after multiple sequences; 

*) winbox - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter under NAT, Mangle and RAW rules;

What's new in v6.40 (2017-Jul-08 08:45):

!) lte - added initial fastpath support (except for SXT LTE and Sierra modems); 

!) lte - added the initial support for the passthrough mode for lte modems that supports fastpath; 

!) wireless - added Nv2 AP synchronization feature "nv2-modes" and "nv2-sync-secret" option; 

*) bonding - fixed 802.3ad mode is RB1100AHx4; 

*) btest - fixed crash when packet size has been changed during test; 

*) capsman - added "current-registered-clients" and "current-authorized-clients" count for CAP interfaces; 

*) capsman - fixed EAP identity reporting in "registration-table"; 

*) capsman - set minimal "caps-man-names" and "caps-man-certificate-common-names" length to 1 char; 

*) certificate - added "crl-use" setting to disable CRL use (CLI only);

*) certificate - update and reload the old certificate with a new one if SKID matches; 

*) chr - fixed MAC address assignment when hot plugging NIC on XenServer; 

*) chr - maximum system disk size now limited to 16GB; 

*) conntrack - fixed IPv6 connection tracking enable / disable; 

*) console - fixed different command auto complete on; 

*) crs212 - fixed Optech sfp-10G-tx module compatibility with SFP ports; 

*) defconf - added IPv6 default firewall configuration (IPv6 package must be enabled for reset); 

*) defconf - improved IPv4 default firewall configuration; 

*) defconf - renamed 192.168.88.1 address static DNS entry from "router" to "router.lan"; 

*) dhcp - added "debug" window is MAC address change;

*) dhcpv4-client - added "gateway-address" script parameter; 

*) dhcpv4-server - fixed lease renewal for DHCP clients that sends renewal with "ciaddr = 0.0.0.0"; 

*) dhcpv4-server - fixed server state on interface change in Winbox and Webfig; 

*) discovery - fixed timeouts for LLDP neighbors; 

*) dns - remove all dynamic cache of RRs of the same type when adding static entry; 

*) dude - fixed server crash; 

*) email - added support for multiple attachments; 

*) ethernet - fixed occasional broken interface order after reset / first boot; 

*) ethernet - fixed a rare linking problem with forced 10Mbps full-duplex mode; 

*) export - added "terse" option;

*) export - added default "init-delay" setting for "/ routerboard settings" menu; 

*) export - add router model and serial number to configuration export; 

*) export - fixed "/ interface list" verbose export; 

*) export - fixed "/ ipv6 route" compact export; 

*) export - fixed MPLS "dynamic-label-range" export; 

*) export - fixed SNMP "src-address" for compact export; 

*) fastpath - improved performance when packets for slowpath are received; 

*) fastpath - improved process of removing dynamic interfaces; 

*) fasttrack - fixed fasttrack over interfaces with dynamic MAC address; 

*) fetch - added "src-address" parameter for HTTP and HTTPS;

*) filesystem - improved error correction process on the tin and RB1100AHx4 storage; 

*) firewall - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter; 

*) firewall - fixed bridge "action = log" rules; 

*) firewall - fixed cosmetic "inactive" flag when item was disabled; 

*) firewall - fixed crash on fasttrack dummy rule manual change attempt; 

*) firewall - removed unique address list name limit; 

*) hAP ac lite - removed nonexistent "wlan-led"; 

*) hotspot - added "address-list" support in "walled-garden" IP section; 

*) hotspot - require "dns-name" to contain "." symbol under Hotspot Server Profile configuration;

*) ike1 - added log error message if the netmask was not provided by the "mode-config" server; 

*) ike1 - added support for "framed-pool" RADIUS attribute; 

*) ike1 - create tunnel policy when no split net provided; 

*) ike1 - fixed minor memory leak is peer configuration change; 

*) ike1 - kill phase1 instead of rekey if "mode-config" is used; 

*) ike1 - removed SAs is DPD; 

*) ike1 - send phase1 delete; 

*) ike1 - wait for cfg set reply before ph2 creation with xAuth; 

*) ike2 - added RADIUS attributes "Framed-Pool", "Framed-Ip-Address", "Framed-Ip-Netmask"; 

*) ike2 - added pfkey kernel return checks; 

*) ike2 - added support for "Mikrotik_Address_List" RADIUS attribute;

*) ike2 - added support for "mode-config" static address; 

*) ike2 - by default use "/ 24" netmask for peer IP address in split net; 

*) ike2 - fixed duplicate policy checking with "0.0.0.0/0" policies; 

*) ike2 - prefer traffic selector with "mode-config" address; 

*) ipsec - added "firewall = add-notrack" peer option (CLI only); 

*) ipsec - added information in console XML for "mode-config" menu; 

*) ipsec - added support for "key-id" peer identification type; 

*) ipsec - let's specify the chain in "firewall" peer option; 

*) ipsec - do not deduct "dst-address" from "sa-dst-address" for "/ 0" policies; 

*) ipsec - enabled modp2048 DH group by default;

*) ipsec - fixed connections cleanup on policy or proposal modification; 

*) ipsec - optimized logging under IPSec topic; 

*) ipsec - removed policy priority; 

*) l2tp - fixed handling of pre-authenticated L2TP sessions with CHAP authentication; 

*) l2tp-server - added "one-session-per-host" option; 

*) log - added "store-out" topic; 

*) log - improved "l2tp" window; 

*) log - optimized "wireless, info" topic logs; 

*) log - work is false CPU / RAM overclocked alarms; 

*) lte - added "accounting" log for LTE connections; 

*) lte - added additional driver support for DWR-910; 

*) lte - added info command support for the Jaton LTE modem; 

*) lte - added initial support for the NTT DoCoMo modem;

*) lte - added support for Huawei E3531-6; 

*) lte - added support for ZTE TE W120; 

*) lte - fixed info command when it is executed at the same time as modem restarts / disconnects; 

*) lte - improved SMS delivery report; 

*) lte - improved reliability is SXT LTE; 

*) metarouter - fixed display of false error message on startup; 

*) mmips - added support for NVME disk; 

*) ovpn - added support for "push-continuation"; 

*) ovpn - added support for topology subnet for IP mode; 

*) ovpn - fixed duplicate default gateway presence when receiving extra routes; 

*) ovpn - improved performance when receiving too many options;

*) packages - increased automatic download retry interval to 5 minutes if there is no free disk space; 

*) ping - fixed ping getting stuck (after several thousand of ping attempts); 

*) ppp - added initial support for ZTE K4203-Z and ME3630-E; 

*) ppp - added output values ​​for "info" command for finding the GSM base station's location ("LAC" and "IMSI"); 

*) ppp - fixed "user-command" output; 

*) ppp - fixed non-standard PAP or CHAP packet handling; 

*) ppp - improved MLPPP packet forwarding performance; 

*) ppp - use the interface name instead of IP as the default gateway; 

*) proxy - fixed potential crash; 

*) proxy - fixed rare program crash after closing client connection;

*) quickset - added "Band" setting to "CPE" and "PTP CPE" modes; 

*) quickset - added special firewall exception rules for IPSec; 

*) quickset - fixed incorrect VPN address value on arm and tile; 

*) quickset - simplified LTE status monitoring; 

*) quickset - use active user name and permissions when applying changes; 

*) rb1100ahx4 - fixed startup problems (requires additional reboot after upgrade); 

*) rb3011 - fixed packet passthrough on switch2 while booting; 

*) rb750gr3 - fixed USB power; 

*) routerboard - added "caps-mode" option for "reset-configuration"; 

*) routerboard - added "caps-mode-script" for default-configuration print; 

*) routing - allow to disable "all" interface entry in BFD;

*) safe-mode - fixed session handling when Safe Mode is used in multiple sessions at the same time; 

*) sfp - fixed invalid temperature reporting when ambient temperature is less than 0; 

*) sms - decode reports in readable format; 

*) sniffer - do not skip L2 packets when the "all" interface mode was used; 

*) snmp - added "ifindex" on the interface traps; 

*) snmp - added CAPsMAN interface statistics; 

*) snmp - added ability to set "src-address"; 

*) snmp - fixed "/ system resource cpu print oid" menu; 

*) snmp - fixed crash on interface table get; 

*) snmp - fixed wireless interface walk table id ordering; 

*) socks - fixed crash while processing many simultaneous sessions;

*) ssl - added wildcard support for the "left-most" DNS label (will allow the use of the signed wildcard certificate on VPN servers); 

*) supout - fixed IPv6 firewall section; 

*) switch - fixed "loop-protect" on CRS SFP / SFP + port; 

*) switch - fixed multicast forwarding is CRS326; 

*) tile - fixed copying a large amount of text over serial console; 

*) tr069-client - fixed lost HTTP header is authorization; 

*) trafficgen - added "lost-ratio" to statistics; 

*) ups - show the correct "line-voltage" value for usbhid UPS devices; 

*) userman - added "/ tool user-manager user clear-profiles" command; 

*) userman - do not send disconnect request for user when "simultaneous session limit reached";

*) userman - lookup language files also in the "/ flash" directory; 

*) vlan - do not delete the existing VLAN interface for "failure: already have such vlan"; 

*) webfig - fixed wireless "scan-list" parameter not being saved after applying changes; 

*) winbox - added "eap-identity" to CAPsMAN registration table; 

*) winbox - added "no-dad" setting to IPv6 addresses; 

*) winbox - added "reselect-channel" to CAPsMAN interfaces; 

*) winbox - added "session-uptime" to their LTE interface; 

*) winbox - added TR069 support; 

*) winbox - do not autoscale graphs outside known maximums; 

*) winbox - fixed wireless interface "amsdu-threshold" max limit; 

*) winbox - the hide LCD menu is CRS112-8G-4S;

*) winbox - make IPSec policies table an order list; 

*) winbox - moved LTE info fields to status tab; 

*) winbox - show "/ interface wireless cap print" warnings; 

*) winbox - show "/ system health" only on boards that have health monitoring; 

*) winbox - show "D" flag under "/ interface mesh port" menu; 

*) wireless - NAK any methods other than MS-CHAPv2 as the internal method in PEAP; 

*) wireless - added option to change "nv2-downlink-ratio" for nv2 protocol; 

*) wireless - added option to set "fixed-downlink" mode for nv2 protocol; 

*) wireless - allow VirutalAP to Level 0 (24h demo) license; 

*) wireless - always use "multicast helper" when DHCP is being used;

*) wireless - do not skip> 2462 channels if interface is WDS slave; 

*) wireless - fixed 802.11u wireless request processing; 

*) wireless - fixed EAP PEAP successful processing; 

*) wireless - fixed compatibility with "AR5212" wireless chips; 

*) wireless - fixed rare crash on cap disable; 

*) wireless - fixed registration table "signal-strength" reporting for chains when using nv2;

Download:

Read More

Punjab University BA / B.sc Registration 2018 for Private Candidates

For Registration Click Here

Read More

How to Create an Apple ID without Credit Card or Other Payment Method

How to Create an Apple ID without Credit Card

Millions of people have this question as how to create an Apple ID without entering their Credit Cards detail in Apples System?.Its because they are scared of being hacked by some unethical person as several instances have occurred in the past few years where big companies like apple were reported to be hacked with passwords and credit card number shown in the systems.

A few years ago, linking a credit card to an Apple account was mandatory. But Apple has changed its stance and has been letting users create an Apple ID without a credit card for a while now.Having an Apple ID is a prerequisite to do just about anything related to Apple services. If you want to buy music on iTunes, download apps in the App Store,Reinstall OS X or use iCloud, you must have an Apple ID

Whatever your reason might be to do so, I am going to show you how to create an Apple ID without a credit card.

Note that if you don’t link a credit card or other payment method to your Apple ID, you will obviously not be able to complete purchases, but you will however be able to download free content, such as free apps, free music or free books.

The main reason of writing this post is, while creating Apple ID it asks to set up a payment method where you have the option to provide Credit/Debit card details or use Paypal, Redeem a gift certificate or select None as a payment method for the free Apple ID,sometimes this option of selecting None is not available or not shown or the option none is there, but after you select next, it loops you to the top of the screen and nothing happens. It also says "For assistance, contact iTunes Support" or "Please contact iTunes support to complete this transaction"

How to Create an Apple ID without Credit Card?

How to Create an Apple ID without Credit Card?

Solutions: This issue of not showing None option as a payment method or looping you to the same payment method screen is always resulted when you are using an existing or old Apple ID that you have already created before either on a windows PC or otherwise and did not set up payment method.As per the Apple there could be following major reasons of not showing None when editing your Apple ID payment information.

Why can’t I select None when I edit my Apple ID payment information?

You might not be able to see or select the None payment option for one of these reasons. If you don't want to use a credit card, you can use another form of payment, such as a gift card.

1. If you have an unpaid balance or payment due

You cant select None as your payment type until you pay your balance. To see which order you need to pay for, view your purchase history on a Mac or PC. When you sign in to the store, you might see a message that there was a billing issue with your last order. Click the Billing Info button to see the order.
After you pay for the order, you can change your payment information to None.


2. If you're using the iTunes Store or App Store for the first time

If you're using the store for the first time with an existing Apple ID, you must provide a payment method. After you create the account, you can change your payment information to None.
If you're creating a new Apple ID, you might be able to create an account without entering your credit card details.

3. If you changed your country or region

When you change the country or region of an existing Apple ID, you must provide a payment method and update your billing options. If you want to remove your payment method after you change the country or region, you can change your payment information to None.


4. If you're a part of Family Sharing

When you set up Family Sharing, the family organizer must provide a payment method. If your family includes a child account, the family organizer must use a credit card as the payment method. This payment method will be used for all purchases initiated by family members and can only be changed by the family organizer.

Create an Apple ID for iTunes Store, App Store, or iBooks Store account without a credit card or other payment method

If you already have an Apple ID

If you've already created your Apple ID, you'll need to add a payment method when you first use it to sign in to the iTunes Store, App Store, or iBooks Store. But you can optionally remove the payment method after you sign in to the store. You wont be asked for a payment method again until you make your first purchase.

If you don't have an Apple ID

If you haven't created your Apple ID, follow the steps below to create one and a store account at the same time, without adding a payment method.

On an iPhone, iPad, or iPod touch

1. Open the App Store, iTunes Store, or iBooks Store.
   
   

   

   How to Create an Apple ID without Credit Card?

2. Choose any free app, song, video, or book.

   

   How to Create an Apple ID without Credit Card?

3. Tap Get next to the item, then tap again to get it.

   

   How to Create an Apple ID without Credit Card?

4. When youre asked to sign in with an Apple ID, tap Create New Apple ID.

   

   How to Create an Apple ID without Credit Card?

5. Follow the onscreen instructions. When you're asked for payment information, choose None. See what to do if None isn't showing or you cant select it.

   

   How to Create an Apple ID without Credit Card?

6. Even though you are creating the account without choosing a credit card, Apple still requires you to enter your name, address and phone number. You can always enter the address and phone number of your school. Scroll down and enter your name, address and phone number, then tap "Next".

   

   How to Create an Apple ID without Credit Card?
7. After you enter all of the information required, you'll be asked to verify your Apple ID by email. Apple will send you a confirmation email to the email address you provided. Check your emails and click the “Verify” link in the email Apple sent you, then log in using your newly created username (your email address) and password.
8. Finally, go back to the App Store application, and sign in your new account.

You should now be able to download free content from Apple. If you ever try to download paid content though, Apple will ask you to update your payment information and provide a credit card.

If you use Family Sharing, and you’re the family organizer, you can’t set your payment information to None. You'll need to use a credit card or debit card.

On a Mac or PC

1. Open iTunes, then go to the iTunes Store by clicking the iTunes Store button at the top of the window.

How to Create an Apple ID without Credit Card?

2. Scroll down and find the country flag in the lower-right corner of the window. If its not the flag of the country where you live, click it and choose your country or region.

Select Language

3. Go to the App Store, Music, TV Shows, or Books section of the store by clicking on one of the icons in the upper-left corner.

How to Create an Apple ID without Credit Card?

4. Download a free app, song, video, or book. To find free items, look in the right column of the window and click any link that includes the word "Free," such as "Free on iTunes" or "Top Free." When you find a free item, click Get beneath its icon.

How to Create an Apple ID without Credit Card?

5. When youre asked to sign in with an Apple ID, click Create Apple ID.

How to Create an Apple ID without Credit Card?

6. Follow the onscreen instructions. When youre asked for payment information, choose None as the payment type. See what to do if None isnt showing or you cant select it.

How to Create an Apple ID without Credit Card?

7. After you enter all of the information required, youll be asked to verify your Apple ID by email. You must verify your Apple ID before you can begin using it. D

In worst scenario where the None option is still not available try following options.

1. Leave the payment method to default VISA and enter a gift card code and your address then click next it will fail but the NONE option will appear the next time , Select none and click next and you are DONE. It worked for some people as claimed on apple support forum.

"it says you can use a itunes voucher in the end I bought a £15.00 itunes voucher and inputted the code and it let me complete my account set up and start to download apps and music.  When I then went back into my account details (after completing the set up) the "none" option had appeared, that's something apple needs to look at, why isn't the "none" option available from the start?"



2. Provide your Credit/Debit Card details, download a free app and then login to https://appleid.apple.com/us/ go to modify the payment information. At this point the none option will be available and you would be able to select this and clear the visa card information.

3. Clear your browsers Caches and Cookies delete history and then try to create a new Apple ID with the Email ID you never ever have tried registering/using your preferred apple id/e-mail address.

Thanks for Reading.

Like us On Facebook, or Follow on Twitter.

Do Comment if You Have Any.

<----------------------------End of Article------------------------>

Source of Information: www. apple .com

Read More

How To Download and Install Any Android App and Game Without Google Playstore/ Gmail Account [Video Tutorial]

How To:

In This Video I'm going to show you how to download and install any Android application and game without Google playstore and Google account...
So, let's start

1# goto "settings/security" and enable "unknown source" option

2# now open default browser and goto Google.com

3# search for any application or game you want to download *and at the end of search just type ".apk"

*Tip# apk is a file which Android able to execute and run, like our windows run .exe files

4# find "apkmirror's" link from search results and open it.

5# download application from apkmirror's website

*Tip# before download it's good to know your mobile's Android version so let's see...

*# so I have Android 6.0.1, I will download apk file which minimum support my android version... Like if someone of you have Android 4.0, he have to download an apk which support 4.0 or blow...

6# install apk manually

*Tip# you can use this apk for future use... Now it's stored in you phone/SD storage...

* You also can share it with your friends via Bluetooth or any other resource

*Note# you also can download apk file from computer and install it by transfering to you phone to storage...

You can also Download APKs from out website by going Here

Video Tutorial:

Read More

How to change the default search engine in Microsoft Edge from Bing to google?

     Microsoft Edge is a web browser developed by Microsoft and is included in Windows 10, Windows 10 Mobile, Xbox One, and Windows Holographic, replacing Bing as the default web browser on all device classes.

We can easily change Bing to google or any other search engine by following the simple steps given below.

Step 1:
 First go to google.com in the browser. For setting google as the default search engine you must visit  it atleast once.For any other search engine you have to open that search engine url atleast once.

Step 1 :Go to Google.com

Step 2:
 Click the three dot button (...)  seen on the right corner. From the drop down box select Settings.

Step 2 :Click on settings

Step 3:
Scroll down and click the View advanced settings 

Step 3: Click View advanced settings 

Step 4:
 Now scroll down and click on Change under the text Search in the address bar with.

Step 4: Click the Change option

Step 5:
Now you can see the previously opened search engine list (you must have opened the desired search engine url atleast once).

Step 5: Check out the previously opened search engine list

Step 6:
Now select the desired search engine and Click the Set as default option.
Thats all, now the default search engine has been changed.

Step 6: Choose the desired search engine and set it as default

Read More